69传媒

School & District Management Explainer

What to Know About PCBs in 69传媒: A Visual Primer

By Mark Lieberman 鈥 October 27, 2022 | Updated: December 22, 2022 12 min read
Illustration of a classroom.
  • Save to favorites
  • Print
Email Copy URL

Most people by now know about lead and asbestos: toxic substances found in old buildings that can cause great harm to people鈥檚 health and the natural environment.

But health and environmental experts say chemicals known as PCBs鈥攑olychlorinated biphnenyls鈥攔epresent an emerging front in the ongoing battle for detoxifying the nation鈥檚 infrastructure, including its aging schools. These chemicals are less widely known but pose substantial risks to people who spend time in school buildings and a challenge for the people managing the money that fuels students鈥 learning.

Here鈥檚 what school leaders, and the people they serve, need to know about PCBs.

What are PCBs?

Polychlorinated biphenyls are man-made chemical compounds that typically appear as oily solids or liquids, and aren鈥檛 very water-soluble. Some estimates say 1 million tons of them were produced worldwide, a majority of them in the United States.

When were they used?

Polychlorinated biphenyls were first created in the late 19th century, but they emerged widely in construction materials in the late 1920s and early 1930s. They were in circulation through the 1970s and their manufacture was banned in the U.S. more than 40 years ago.

Buildings from the 1980s aren鈥檛 out of the woods when it comes to PCB contamination, either, said Bernie Mizula, the director of environmental health and safety for the International Union of Painters and Allied Trades: 鈥淲hen you phase something out of use, it鈥檚 not like every contractor or business owner says, 鈥業鈥檓 going to search my factory or shop for all these lead-based paints and throw them right out.鈥欌

Even in places where, for instance, light fixtures that may have contained PCBs were replaced, contractors might have missed a few on their way through the building鈥"the janitor鈥檚 closet, the boiler room, the athletic closet,鈥 said Elinor Fanning, a toxicologist for the Washington state health department.

What were they used for?

Road crews used them in sticky liquid form to keep dust from flying up. They can be found in television sets and radios, microscopes, and electrical equipment, where they served as insulators and lubricants.

They鈥檙e nonflammable, they don鈥檛 smell, and they last a long time. In construction, they were used primarily to keep caulk and insulation from drying out, helping building materials last longer. That was particularly desirable for public buildings, like schools and government offices, which are intended to last a long time and weather constant wear and tear.

鈥淚鈥檝e heard anecdotes from construction workers where they were talking about PCBs being the secret sauce they鈥檇 mix into glues to make it last longer and easier to work with,鈥 said Rachel Marek, an assistant research scientist who studies PCBs at the University of Iowa. 鈥淐onstruction workers actually really liked it until we all realized it was toxic.鈥

PCB properties: Electrical connectivity, heat-resistant insulation, flexible sealants and coatings, flame resistant.

What happens to people who are exposed to harmful levels of PCBs?

A wide range of things. Once they enter the body, they鈥檙e not likely to leave. Health effects associated with PCB exposure may involve cardiovascular, gastrointestinal, immune, musculoskeletal, and neurological systems.

Studies showthat high levels of exposure may lead to:

  • Cancer, including non-Hodgkin鈥檚 lymphoma
  • Skin lesions or rashes
  • Depression
  • Nausea
  • Vomiting
  • Abdominal pain
  • Headaches
  • Dizziness
  • Reproductive disorders
  • Higher susceptibility to pneumonia and viral infections
  • Impaired
  • High blood pressure
  • Diabetes
  • Neurological and development delays for young children and children exposed in utero
  • Weight gain or weight loss in children born to women who are exposed

Unlike other toxic chemicals like asbestos, PCBs can affect people鈥檚 health even if they鈥檙e not disturbed, thanks to their ability to spread from walls and surfaces to the air.

When was their manufacture banned in the U.S.?

In 1979, the U.S. Environmental Protection Agency added PCBs to the list of substances banned from being manufactured, but . To date, PCBs are only one of nine entries on that list. They鈥檙e also among roughly a dozen chemicals banned globally, according to the enacted in 2001.

Subsequently, the agency published regulations outlawing construction materials that contain more than 50 parts per million of PCBs. (Bob Herrick, a senior lecturer of public health at Harvard University, says 1 part per million is equivalent to a drop of water in a 10-gallon tank, or 1 inch in 16 miles.)

To what extent have they lingered? Where?

Though the EPA prohibited the manufacture of PCBs and requires remediation, it doesn鈥檛 require schools or other institutions to proactively seek the chemicals out in places where they were already used.

A by Herrick estimated between 13,000 and 26,000 school buildings in the United States contain building caulk laced with PCBs. If removing PCBs from each one required $2 million, that could mean a nationwide remediation cost of $25 billion to $50 billion, according to a from the office of U.S. Sen. Ed Markey, D-Mass. Herrick has contributed testimony on behalf of plaintiffs in legal cases against Monsanto, the company that manufactured PCBs.

Some researchers believe the number could be even higher, especially when factoring in schools with multiple buildings and schools that don鈥檛 have PCBs in caulk but do have them in other places, like light fixtures or tiles.

Of the 1,700 school buildings listed in Massachusetts鈥 alone, for instance, slightly more than half were built between 1950 and 1979, the critical period for PCB proliferation.

School buildings aren鈥檛 the only places where PCBs have lingered. Construction crews on Capitol Hill in 2019 while preparing for renovation.

Meanwhile, states including , , and in the last year have sued Monsanto, which was the primary manufacturer of PCBs, over contamination in waterways. A class action covering 2,500 cities and towns resulted in a in 2020. Washington state, the first in the country to sue Monsanto over PCB contamination, in a 2016 settlement, and in a 2022 settlement.

Why haven鈥檛 schools gotten rid of PCBs?

Remediating PCBs can be a logistical nightmare. Sometimes, it means shutting down and razing an entire school campus. At minimum, it often means cordoning off portions of a school building. And determining precisely where PCBs in the air are coming from is a challenge even before the remediation process begins.

That鈥檚 not to mention the cost. The Burlington district in Vermont spent millions of dollars relocating its high school operations to a temporary facility and will spend roughly another $200 million to build a new PCB-free building in the old one鈥檚 place. Even for schools that don鈥檛 need to be fully replaced, PCB mitigation can cost hundreds of thousands of dollars.

Who is most likely to be harmed by PCBs?

Underresourced districts鈥攊n many cases, disproportionately populated by low-income students and students of color鈥攁re more likely to have fallen behind on building renovations or lack the staffing to proactively track environmental hazards. High-poverty districts tend to have than in tax-rich districts.

Environmental-justice advocates point out that communities of color have long been disproportionately exposed to toxic substances. In the 1980s, the state of North Carolina鈥檚 near a rural, predominantly Black community prompted six weeks of protests and led to over 500 arrests.

Why is it so difficult to understand the effects PCBs have on the body?

It鈥檚 impossible to create a control group because, thanks to decades of pollution of waterways and the air, 鈥渆verybody has PCBs in their body,鈥 said David Carpenter, a public-health physician and PCB expert at the University of Albany. 鈥淲hat you do in any human study is compare people with lower exposure to people with higher exposure.鈥 Carpenter has contributed testimony on behalf of plaintiffs in legal cases against Monsanto.

But PCBs are rarely the only chemical found in the body. DDT and other pesticides tend to have similar effects on humans, so researchers sometimes struggle to sort out which chemicals are causing which health problems. Studies of cells and animals tend to be more reliable.

For a long time, researchers focused on humans鈥 intake of PCBs via the food they ate鈥攑articularly seafood from contaminated waterways. But a by researchers at the University of Iowa found that people who lived near a contaminated waterway in East Chicago didn鈥檛 have higher PCB levels in their blood than people who lived in Comus Junction, Iowa. That study helped shift researchers鈥 focus to the buildings where people spend their time鈥攊ncluding schools.

Image of PCB exposure by inhalation, ingestion, dermal contact.

How do you test for them?

Experienced PCB-testing contractors typically start with a physical inspection of caulk, paint, light ballasts, floor and ceiling, gym-floor varnish, and even transformers on the site. Then they sample pieces of all those items in bulk and the air as well.

After the materials that contain PCBs are removed, crews conduct another inspection to make sure that the materials around the affected area don鈥檛 still have lingering PCBs.

Individuals can also get their blood tested by commercial labs that determine PCB levels. The labs are less common than the labs that process routine drug tests, but general practitioners may be able to help find them.

What counts as a harmful level?

The EPA doesn鈥檛 require schools to test for PCBs, but it does provide guidance for schools that do test. Here are the maximum levels of PCBs they say are acceptable without remediation:

Some states have stricter action levels than the EPA; Vermont, for instance, requires schools to take action on PCB levels of 30 nanograms per cubic meter in pre-K facilities, 60 for kindergarten to 6th grade, and 100 for 7th grade to adult.

EPA regulations require disposal in a toxic-waste dump, , of any materials that contain more than 50 ppm of PCBs. They don鈥檛, however, require institutions like schools to test whether PCB levels meet that threshold, though they do offer online guidance.

Where has remediation happened?

Malibu High School in Southern California has undergone substantial renovations to manage its PCB problems after parents sued in 2016 and petitioned a judge to require the district to take action.

Clark Elementary School in Hartford, Conn., shut down permanently in 2015, and its students were relocated elsewhere after high levels of PCBs were discovered.

Burlington High School in Burlington, Vt., has met the same fate, though plans are in motion to replace its campus with a new facility.

69传媒 in ; ; the ; and . have also dealt with elevated levels of PCBs.

What is the federal government doing about this?

Not much. Sen. Markey in 2016 on the problems with PCBs in schools and promised legislation to fund remediation would follow. Five years later, but has languished so far in Congress.

Markey, joined by U.S. Reps. Jamaal Bowman, D-N.Y., and Andy Levin, D-Mich., this February for the EPA to include funding for PCB remediation in schools in its annual budget. The agency didn鈥檛 respond to that request.

The Obama administration was working on tightening regulations for PCBs in schools and other buildings, but the Trump administration reversed those efforts, and the Biden administration doesn鈥檛 appear to have picked them up.

What are states doing about this?

Vermont passed a law in June 2021 requiring the state鈥檚 environmental conservation department to test all pre-1980 school buildings for PCBs. Lawmakers also included $32 million in one-time funds to remediate PCB concerns that arise.

Washington state hasn鈥檛 gone so far as to require testing statewide. But after a this January exposed long-standing PCB problems in the state鈥檚 Monroe district, lawmakers the following month for schools to replace old light fixtures鈥攔egardless of whether they test positive for high levels of PCBs. The state also commissioned a study from researchers at the University of Washington to determine the appropriate standards for remediation and the costs of doing that work statewide.

At least 18 state websites offer PCB guidance geared toward schools, and seven more have a general page about PCBs, according to an Education Week analysis. But that leaves roughly half of U.S. states鈥攊ncluding Alabama, Indiana, Georgia, Kansas, Pennsylvania, and Texas鈥攖hat don鈥檛 appear to offer schools easily accessible guidance on how to deal with this toxic threat.

How does America鈥檚 school finance system affect the challenges districts will face with PCBs?

More than 10 states don鈥檛 provide any funds for school districts to spend on improving facilities or building new ones. And districts in nearly every state have to rely in part on local tax revenue to fix their infrastructure.

As a result, the list of deferred maintenance projects is sprawling, and the costs are explosive. U.S. schools collectively spend an estimated $85 billion less per year than would be needed to fully modernize buildings nationwide, according to a by advocacy groups including the 21st Century School Fund Inc., the International WELL Building Institute, and the National Council on School Facilities.

What are the debates over policy approaches to tackling PCBs?

Without testing mandates, schools typically discover PCB issues when community members start falling sick or right before a big construction project. If schools were able to keep up with their maintenance needs, they might be finding PCBs more easily or they might have the budgetary space to proactively tackle urgent health concerns that will be expensive to remediate.

A nationwide effort to address PCBs in schools should start with schools that serve the youngest children, said Keri Hornbuckle, a professor of civil and environmental engineering who runs a PCB research group at the University of Iowa.

鈥淪etting one level at which it would be safe or not seems unlikely to me to ever occur,鈥 said Hornbuckle. 鈥淲hat we should be thinking about is, how can we limit exposure to these chemicals?鈥

Hornbuckle has contributed testimony on behalf of plaintiffs in legal cases against Monsanto.

Dive Into The Project

How PCBs Disrupt School Districts: A Vermont high school shut down and sent students and staff to a former Macy鈥檚 after high levels of PCBs were discovered. Here鈥檚 what unfolded.
Rural 69传媒 Should Expect Confusion: Administrators at a rural Vermont school were flummoxed on how to move forward鈥攁nd how to pay鈥攁fter the state told them they鈥檇 need to remediate PCBs.
A PCB Primer: What you need to know about polychlorinated biphenyls, where they鈥檙e found, the threats they pose, and what can be done about them.
A Visual Guide to PCBs: How do these chemicals move from one part of a school building to another? How does exposure affect humans? An animated guide.
What 69传媒 Can Do Now: 69传媒 are often reluctant to test for PCBs because they鈥檙e afraid of what they might find. These proactive steps can make a difference.
The Human Toll of PCBs: A former teacher in Washington state shares the illnesses that ended her full-time teaching career and the lawsuit she pursued as a result.

Maya Riser-Kositsky, Librarian and Data Specialist contributed to this article.

Events

This content is provided by our sponsor. It is not written by and does not necessarily reflect the views of Education Week's editorial staff.
Sponsor
Artificial Intelligence Webinar
AI and Educational Leadership: Driving Innovation and Equity
Discover how to leverage AI to transform teaching, leadership, and administration. Network with experts and learn practical strategies.
Content provided by 
This content is provided by our sponsor. It is not written by and does not necessarily reflect the views of Education Week's editorial staff.
Sponsor
School Climate & Safety Webinar
Investing in Success: Leading a Culture of Safety and Support
Content provided by 
Assessment K-12 Essentials Forum Making Competency-Based Learning a Reality
Join this free virtual event to hear from educators and experts working to implement competency-based education.

EdWeek Top School Jobs

Teacher Jobs
Search over ten thousand teaching jobs nationwide 鈥 elementary, middle, high school and more.
Principal Jobs
Find hundreds of jobs for principals, assistant principals, and other school leadership roles.
Administrator Jobs
Over a thousand district-level jobs: superintendents, directors, more.
Support Staff Jobs
Search thousands of jobs, from paraprofessionals to counselors and more.

Read Next

School & District Management Spooked by Halloween, Some 69传媒 Ban Costumes鈥擝ut Not Without Pushback
69传媒 are tweaking Halloween traditions to make them more inclusive to all students.
4 min read
A group of elementary school kids sitting on a curb dressed in their Halloween costumes.
iStock/Getty
School & District Management 69传媒 Take a $3 Billion Hit From the Culture Wars. Here鈥檚 How It Breaks Down
Culturally divisive conflicts in schools have led to increased legal and security costs, as well as staff time spent on the fallout.
4 min read
Illustration of a businessman with his hands on his head while he watches dollars being sucked down into a dark hole.
DigitalVision Vectors
School & District Management Opinion The Blind Spot More Educators Need to Recognize
A simple activity in a training session caused a chain reaction that strengthened an educator's leadership for decades to come.
5 min read
Screen Shot 2024 10 29 at 9.19.10 AM
Canva
School & District Management Opinion 9 Ways 69传媒 Can Improve Life for Teachers and 69传媒
Educators suggest low-cost strategies to improve the education experience for teachers and learners alike.
8 min read
Conceptual illustration of classroom conversations and fragmented education elements coming together to form a cohesive picture of a book of classroom knowledge.
Sonia Pulido for Education Week